Recently Updated Pages
URVEPi Tips&Tricks
Python and IDLE3 in URVEPi Debian 11 Python3 is installed by default. To install IDLE3 just type ...
URVEPi Troubleshooting
Troubleshooting Tips for URVEPi's Disappearing Ethernet and Rebooting Issues. If you are experien...
Do we have instruction to flash Android to URVE Pi?
The installation procedure for Android is the same as for Linux. More details in our user manual ...
Please let me know how to flash the OS without having access to windows.
You can use the flashing library on Linux: https://github.com/rockchip-linux/rkdeveloptool.
Can I use my RPi software and hardware - ESPECIALLY CAMERAS - with the URVE BOARD Pi?
Currently, cameras from Raspberry Pi do not work with Urve Pi. We are working on delivering a sol...
Are Raspberry's DSI screens supported?
No, they aren't.
Is it possible to use 4 UART interfaces simultaneously?
As far as we know, yes. But we haven't tested.
What development tools are available for URVE BOARD Pi?
We provide BSP (for Linux and kernel modifications) and SDK (all Linux compilations + QT Creator)...
Can I use DSI, CSI, I2C, etc. interfaces as easily as on the Raspberry Pi board?
Yes, it should work just like on the RPI.
Are there URVE Pi versions with more memory than 8GB?
Only for the right OQ (order quantity).
What is the reason for temperature range limitation (0-70°C). Are you planning any developments for industrial scopes?
The temperature range is the result of the use of components (RAM, eMMC, CPU). We are not plannin...
Does the clock (RTC) use any pins?
No, it doesn't.
What is the energy consumption?
URVE Board Pi consumes approximately 2W when idle. At medium load, the consumption is at 4W.
Is there a reset button/pin/pad?
We don't have a reset button/pin/pad. Only removing the cable from microUSB.
Why does the clock (RTC) consume a battery?
A battery-powered clock ensures that the time is kept when there is no power and no network conne...
Does the URVE BOARD Pi have a built-in microphone?
Yes, the computer has a built-in microphone.
Is it possible to upload firmware using the USB C port?
No, USB 2.0 OTG port is used for flashing the OS.
Does URVE Pi have a built-in watchdog? Does it run in the basic configuration?
It doesn't run in the basic configuration, but adding it to the kernel is trivial, as well as tur...
Can data be stored on the SD card if the OS (by default) is installed on the eMMC?
Of course.
Is it possible to install the OpenBSD operating system on URVE Pi?
Probably yes, but we do not support such a scenario. It could also be hard to run VPU and GPU acc...